rhel5.2下成功关闭ThinkPad触摸板

[root@localhost X11]# cat xorg.conf.414
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Mon Mar 23 15:33:27 PST 2009
 
# Xorg configuration created by pyxf86config
 
Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0 "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Synaptics" "CorePointer"
EndSection
 
Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
EndSection
 
Section "InputDevice"
    Identifier     "Synaptics"
    Driver         "synaptics"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "auto-dev"
    Option         "Emulate3Buttons" "yes"                  #修改前的/etc/X11/xorg.cong
EndSection
 
Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection
 
Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
EndSection
 
Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection
-----------------------------------------------------------------------------------------------------------------------------------
[root@localhost X11]# cat xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Mon Mar 23 15:33:27 PST 2009
 
# Xorg configuration created by pyxf86config
 
Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0 "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Synaptics" "CorePointer"
EndSection
 
Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
EndSection
 
Section "InputDevice"
    Identifier     "Synaptics"
    Driver         "synaptics"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "auto-dev"
    Option         "Emulate3Buttons" "yes"
    Option      "SHMConfig" "on"                        #修改后的/etc/X11/xorg.cong
EndSection
 
Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection
 
Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
EndSection
 
Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection
---------------------------------------------------------------------------------------------------------------------
 
# synclient touchpadoff=1     关闭触摸板
 
# synclient touchpadoff=0     开启触摸板
 
---------------------------------------------------------------------------------------------------------------------
注意：
         可能大部分人的是/dev/input/mice, 这里改成了event2,因为我用cat /proc/bus/input/device查看后得出的我的触摸板Handlers=mouse0 event1 ，所以改为event1,所以这个值是根据个人的笔记本触摸板的Handlers值来决定的)
[root@localhost X11]# cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
 
I: Bus=0011 Vendor=0002 Product=0007 Version=0000
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
S: Sysfs=/class/input/input1
H: Handlers=mouse0 event1
B: EV=b
B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
B: ABS=11000003
 
I: Bus=0003 Vendor=15d9 Product=0a33 Version=0100
N: Name="USB Mouse"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/class/input/input2
H: Handlers=mouse1 event2
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
 
I: Bus=0011 Vendor=0002 Product=000a Version=0000
N: Name="TPPS/2 IBM TrackPoint"
P: Phys=synaptics-pt/serio0/input0
S: Sysfs=/class/input/input3
H: Handlers=mouse2 event3
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
 
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input4
H: Handlers=kbd event4
B: EV=40001
B: SND=6
 
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input5
H: Handlers=kbd event5
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0
 
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input6
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0