以赛博中文的ISO文件为例。 　　你可以使用ISO文件在SCO下直接安装，但必须保证你的机器上已经安装了光驱，并且在核心中含有CDROM设备，即hwconfig -h 列表中有CDROM信息。接下来你可以通过下面的步骤来处理： 　　　cd /dev 　　　mv cd0 cd0.bak 　　　cd /tmp (此处假定你的cyber.iso放在/tmp目录中) 　　　marry -a cyber.iso 　　　cd /dev 　　　ln -s /dev/marry/tmp/cyber.iso cd0 　　　l cd0 显示结果如下： 　　　brw-r----- 1 root sys 76, 1 Feb 26 10:45 cd0@ 　　　mv rcd0 rcd0.bak 　　　mknod rcd0 c 76 1　 　　　l *cd0 显示结果如下： 　　　brw-r----- 1 root sys 76, 1 Feb 26 10:45 cd0@ 　　　crw-r--r-- 1 root sys 76, 1 Feb 26 10:48 rcd0 　　 　　　custom 　　　选择安装介质时选CDROM就可以安装了。 　　　记得安装完成之后 　　　cd /dev 　　　rm cd0 rcd0 　　　mv cd0.bak cd0 　　　mv rcd0.bak rcd0; 　　　marry -d /tmp/cyber.iso 　　　恢复你的光驱设备，否则你的光驱不能使用啦！ 补充marry的说明： marry -- marriage driver 　　The marriage driver allows a regular file to be treated as a device. It does not drive any hardware directly, but it redirects reads and writes on its device to the associated regular file. 　　marry(ADM) uses the marriage driver to associate a block special device file with a regular file. The regular file may then be accessed through the block device node created below the /dev/marry directory, or through a character device node. 　 swap(ADM) uses marry to allow a regular file to act as a block device for swapping. marry may also be used to allow a regular file to act as a block device for mounting.